Product ID:DEVCON PLASTIC STEEL EPOXY (RESIN) PART A,
MSDS Date:02/08/1990
FSC:8040
NIIN:00N021824
Kit Part:Y
MSDS Number: BLTLG

Emergency Phone: 708-296-6111

Info Phone: 708-296-6111

Cage: DO397

Telephone: 708-296-6111

Cage: DO397

BISPHENOL A DIGLYCIDYL ETHER RESIN

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 10-30%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MILD IRRITATION TO EYES. METAL FILLER
PARTICLES COULD SCRATCH CORNEA. MINIMAL TO MILD IRRITATION OF SKIN
IN MOST PEOPLE. INHALATION UNLIKELY. NO DATA ON SYMPTOMS FOUND. ALL
INGREDIENTS ARE OF LOW ACUT E ORAL TOXICITY. NO DATA FOUND ON
SPECIFIC SYMPTOMS. APPROX 1% OF WORKERS MAY BECOME SENSITIZED BY
TOO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: MUCH CONTACT WITH EPOXY RESINS;
ITCHING, SWELLING OR RASHES MAY THEN RESULT FROM FURTHER CONTACT.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA AND OTHER SKIN
DISORDERS.

First Aid:EYES: FLUSH EYES WITH CLEAN WATER FOR AT LEAST 15 MINS WHILE
GENTLY HOLDING EYELIDS OPEN. GET MD ATTN . SKIN: WASH SKIN
THOROUGHLY WITH SOAP AND WATER. CONSULT A MD IF IRRITATION
DEVELOPS. INHAL: REMO VE TO FRESH AIR. ADMINISTER O2 IF BREATHING
IS DIFFICULT. GET MD ATTN. INGEST: DO NOT INDUCE VOMITING. DILUTE
WITH TWO GLASSES OF WATER AND GET MD ATTENTION.

Flash Point Method:PMCC
Flash Point:400F,204C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:PREVENT SKIN CONTACT. SCRAPE UP AND DISCARD IN
SUITABLE CONTAINERS USING INERT ABSORBANT MATERIAL SUCH AS
VERMICULITE IF NEEDED. WASH SPILL AREA WITH AN INDUSTRIAL CLEANING
AGENT; IF SOLVENT IS USED, TAKE CARE AGAINST OVEREXPOSURE AND
FIRE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE WELL CLOSED IN A COOL, DRY
PLACE. AFTER MIXING WITH HARDENER, OBSERVE PRECAUTIONS RECOMM FOR
HARDENER. AFTER PROPER CURING, PROD IS NOT HAZ.
Other Precautions:CONTAM CLOTH & PROT GEAR SHLD BE REMOVED & CLEANED
BEFORE REUSE. LEATHER ARTICLES SUCH AS SHOES & BELTS CANNOT BE
DECONTAM & SHLD BE DISCARDED. WASH THORO AFTER USING, ESPECIALLY
BEFORE EATING/ SMOKIN G. WHEN SANDING/MACH CURED MATL,(SUP DAT

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOC EXHST: RECOMM FOR CONFINED AREAS. MECH: ADEQUATE FOR
NORMAL USE.
Protective Gloves:CHEM RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE GEAR AS REQUIRED TO PREVENT SKIN
CONTACT.
Work Hygienic Practices:USE DIRECTED ON PRODUCT LABEL; PRACTICE GOOD
HABITS OF CLEANLINESS.
Supplemental Safety and Health
SPILL PROC: TAKE PROPER PRECAUTIONS AGAINST INHALATION OF DUSTS
GENERATED. THE NUISANCE-DUST TLV OF 3.5 MG/M3 SHOULD BE OBSERVED
FOR THESE PARTICULATES.

HCC:N1
Vapor Pres:NIL
Vapor Density:>1 (AIR=1)
Spec Gravity:2.8
pH:7
Evaporation Rate & Reference:<<1 (BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:DARK GREY PASTE WITH LITTLE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES AND OXIDIZERS.
Stability Condition to Avoid:OPEN FLAME AND EXTREME HEAT.
Hazardous Decomposition Products:COX; ALDEHYDES AND ACIDS FROM
INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN THIS RESIN IS
MIXED WITH EPOXY HARDENER. USE CAUTION WHEN MIXING A POUND OR MORE.

Waste Disposal Methods:THE RESIN CONTAINS NO RCTRA/CERCLA LISTED HAZ
WASTES. DISP OF I/A/W APPLICABLE STATE, LOCAL, AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.